There Is 6 Reasons Companies Are Using a Safety Monitor for Vehicles

Technology inside vehicles continues to progress at a rapid rate. Companies are now incorporating additional technology for a variety of reasons including safety and accountability of drivers. This is typically accomplished by adding a monitor for vehicles. This allows both the driver and third parties to view how well someone is driving. To implement this program across an entire company is a significant undertaking. Fortunately, the number of reasons to use a safety for vehicles continues to grow.

The first reason more companies are using a safety monitor for vehicles is it reduces motor vehicle crash rates. There’ve been several studies showing a reduction in the overall motor vehicle crash rate of up to 93% among companies who use both a safety monitor and implemented a vehicle safety program. Even studies with lower results still report nearly a 50% reduction in accidents per year.

The second safety benefit for implementing a monitor for vehicles is it reduces speeding. When drivers know, someone is potentially watching they tend to drive more cautiously. Some studies note a 60% reduction in speeding which is valuable because for every one mile-per-hour decrease in speed the corresponding crash frequency reduces by nearly 5%.

The third increased safety belt use is another reason for adding an additional layer of security. A safety monitor for vehicles not only increases safety values but also reduces other at risk driver behavior such as following too closely and distracted driving.

The fourth an unintended benefit discovered by several companies is a reduction in fuel costs and improved public perception. Some companies have reported a significant reduction in miles driven as well as reduced idling time. Plus, a reduction of complaints of company drivers by residents has been associated with the use of a safety monitor for vehicles as well.

The fifth a financial benefit of implementing a monitor for vehicles within the company is reduced maintenance costs. In combination, the reduced mileage and idling time along with less aggressive driving styles has significantly reduce the frequency and extent of maintenance and repairs to vehicles. The reduction in crashes also reduces maintenance needs as well.

The final benefit of using a safety monitor for vehicles is it allows companies to identify additional cost saving opportunities. For example, some companies use it as a tool to provide regulatory agencies with verifiable proof of compliance and it allows easy documentation for off-road mileage which can be used to apply for off-road fuel tax credits.

Depending upon the type of company there are a variety of additional benefits to using a safety monitor for vehicles as well. Regardless of the company type, the six most common benefits continue to be a reduction in vehicle crash rates, reduction in speeding, increase safety belt use, reduced fuel costs, reduced maintenance costs, and an enhanced ability to identify additional cost saving opportunities.

Why You Should Say No to These 5 “Mistakes” While Finding a Car Key Replacement

Have you lost your car keys ever?

It is one of the biggest nightmares ever. And, probably, it will happen with every 8 out of 10 persons. In this situation, an individual will certainly become a victim of the mad rush in the entire house for an entire day. The worst part is that you won’t find your set of keys after a long struggle. Clueless? What to do? It is a bad day, right?

After this panic subsides, the car owners step out to find the reliable resort. They proceed towards either the manufacturers or the local dealers, who provide the duplicate set of the keys. Both are the fruitful solutions for the problem. But, nowadays, most of the persons choose the latter one. They are actually tried and trustworthy approach for the car key replacement.

However, the major part is to find the honest locksmith, who will execute the task right and in the fair price. And, side by side, the car owners should prevent themselves to commit some blunders whilst the searching process. Let us discuss them…

5 Mistakes to Avoid When Finding a Locksmith

    • Mistake 1: Don’t wait for the next occasion to contact the locksmith
      Most of the car owners have witnessed doing this fault. They postpone the operation of the key replacement, as they don’t require their vehicle at that particular moment. But, don’t do this. You never know when you will need it back. Hence, contact the right person for getting your new car remote.

 

    • Mistake 2: Use the internet to search but don’t skip the physical visit
      Many people use the internet to find the locksmith and they will easily rely on the references. It is not bad to choose the online mode. But, to trust the dealers without any physical research is a wrong step. So, plan your visit to the address and then decide something.

 

    • Mistake 3: Don’t go with only words
      The third fault is that most of you are in an urgency, as you need your car fast. So, it is advised that don’t be in a hurry. Be patient and perform the meticulous research of a specific firm. Don’t just believe on the words that you hear through your phone. Explore the portfolio or ask the physical proofs from the company. Believe on your eyes, not only on the ears.

 

    • Mistake 4: Don’t get attracted towards low price
      Many agencies strive to allure you by offering the less price and various other deals. But, don’t get trapped into their fake actions. It is your car key and you can’t afford to get it replaced by any local person. So, always do your homework properly.

 

  • Mistake 5: Don’t hand over your vehicle to the locksmith
    Your car is your important asset. Don’t give its full charge to the locksmith. Remember, its key replacement needs a one-time analysis by the dealer. Be with the person at the time of evaluation and then keep your vehicle under your authority.

Is Nesessary To Change Car Window Tinting By Your Self?

Do it yourself car window tinting is so tempting because it appears that it can save a lot of money compared to hiring a pro. Some online tinting kits claim to cost about 10 bucks plus the $15 to $25 cost of the half a dozen tools you may need. The idea that you might be able to reduce glare, increase privacy, decrease theft potential, keep cooler in the hot times and maybe add a nice looking touch to your favorite ride for less than $35 can be a tempting proposition.

Well that’s the up side. The question is how difficult is it to actually apply the tint, have it look great and last like the professional jobs?

It starts with the prep. Obviously when you apply the tint to the inside of your auto windows you will need it to be absolutely spotless. Any dust or dirt particles will need to be completely removed with the proper cleaning chemicals and a razor blade. You will need to be careful to not scratch the glass while cleaning because any scratch will be apparent under the tint.

If you own a dog its hair can be a royal pain to control. You not only have to remove the hair stuck to the window surface but as you move around the car you will be stirring up hair that is resting on the floor and seats. You may have to continually re-wipe the glass prior to applying the tint. Sometimes this can be such a big problem that you may even need to first have your car detailed professionally which will add quite a bit to the final cost.

Another nuisance occurs with the hairy felt-like spacer bars that are often found at the bottom of any roll-up windows. The felt needs to be tediously covered with something like masking tape in order to prevent the little tiny hairs from landing on the window and getting pressed under the tint film during the preparation and application processes.

The rubber door window seals often get in the way of cleaning and installing. They need to be pried away from the glass with expensive duct tape. Sometimes it is best to remove them altogether. It’s even necessary to remove the door panels of some car models in order to get it just right.

One of the most challenging parts is fitting the tint to the back window of just about any car. Sometimes the 3rd brake light makes it difficult or nearly impossible to work and will need to be removed and reinstalled after the job is complete. It can be necessary to actually remove the entire deck at the top of the back seat.

The windows usually bend vertically as well as horizontally and require very careful piecing and fitting so that the seams become invisible and that there is no crinkling. Some professional installers will practice under the coaching of a master, experienced installer on 6 or 8 cars for free or at a greatly reduced price in order to begin to get enough experience to do a competent job. It can really be that challenging.

This is by no means an exhaustive list of all the problems that can occur to make your first tinting job a nightmare. Like any craft it takes time to efficiently solve the many challenges that inevitably will come your way. Unless you are a very patient, mechanically inclined and experienced do-it-yourselfer you may find that the complexity and craftsmanship requirements of this type of project is well worth leaving it to the experienced professionals.

The Way To Take Care of Window Tint

So you had your vehicle’s windows tinted. Congratulations! You might be asking yourself, “What now? What should I expect? How do I take care of window tint?” There could be a lot of other questions going through your mind, but don’t worry. This article will tell you what you might encounter right after getting your tint installed and how to help your tint last as long as possible.

Window Tint Care Tips (more details below)

– Wait 2-5 days before rolling down your windows (depending on weather).
– If you see small water bubbles form, don’t touch them. They’ll go away soon.
– Wait 1 week before you wash the inside of the windows.
– Use glass cleaners that don’t use ammonia. Look for glass cleaners that say “Tint Safe” on the label.
– Use a clean microfiber towel to clean the glass for the best results.
– Your film should achieve full clarity within 30 days.
– Be careful with your seat belt. If you fling your seat belt off, it could hit the window and damage the film.
– Be careful with jewelry as well. Sometimes jewelry with sharp edges like rings and watches can scratch the film if you rest your arm near the window.

Window films are applied with a solution that keeps the film from sticking to the glass until needed. Even though we use a squeegee to get as much water out as possible, some water is left behind. You can see this as streaking that is most easily seen from the outside. Because that water has to dry out for the film to completely stick to the window, you should wait anywhere from 2-5 days before you roll down your windows, depending on the weather (the sunnier, the better). Within those few days you may also notice some water bubbles forming. Those are normal. This means that the film is starting to grab the glass and is beginning to push out the water. Don’t touch these bubbles. They’ll go away on their own. The first few days are the most important time to take care of window tint to make it last as long as possible.

In the next week you’ll also want to wait to wash your windows. This isn’t completely necessary, but we recommend waiting to keep the film in place. Some people tend to scrub the windows hard, and if the right amount of pressure is applied in the right areas you could cause the film to peel and bunch up. After that week, when you do wash the windows, be sure to use a cleaner that is “Tint Safe.” These cleaners don’t use ammonia, which can be very harmful to your film. After 30 days your window tint should have achieved full clarity and will now last a long time!

It’s very easy to take care of window tint. The most important times are within the first week of getting your windows tinted. Those first few days are crucial to making sure your film outlasts your vehicle. Once you get past those days, it’s smooth cruising in style and safety.

Is Nissan Wheel Spacers Are Good For Your Car?

Wheel spacers are a great item for your car. The advantages of wheel spacers are many. However, there are many car manufacturers who are not comfortable with the buyer using products manufactured outside their company. In fact, they have mentioned it clearly in their warranty card that if you use products not manufactured by them, all the facilities offered under the warranty clause will get null and void.

Is buying Nissan wheel spacers a good idea for your car?

The answer will vary from user to user. There may be some who are interested in using products manufactured by another car manufacturer. However, if we this aspect aside, we can shortlist the areas as to why buying Nissan wheel spacers is a good idea.

· Enhances the appearance: When you search option for Nissan wheel spacers you can be rest assured that the look and appearance of your car will get improved automatically. These spacers is an attractive to look at and give the car a new look and feel. It is a great way to change the existing, old and worn out spacers installed in your car.

· Cost effective: These spacers are not very expensive. As such you end up saving money which you would not have been able to do if you opted for other variety. Browse the market and you will get an idea that compared to the available varieties, the one offered by Nissan are quite affordable and easy on the pocket.

· Available in different sizes: These wheel spacers come in different sizes. Depending on your car model, make, size, weight and the tire type, you can opt for the spacers. You are sure to find the one that best fits your vehicle.

· High quality: The spacers offered by Nissan are made out of high quality alloy. They undergo different stages of quality tests before being launched in the market. As far as corrosion of the metal is concerned, you don’t have to worry about anything. Get it installed and forget about it.

· Ensures good control over the car: When you opt for wheel spacers, the first thing that you will notice is that you have a better control over your car. It gets easier to turn the car in different directions. However if you find that the weight is on the heavier side, then opt for a better lubricant and wider tires to minimize the weight experienced.

· Long lasting: The wheel spacers offered by Nissan are long lasting. They last for several years. This means that once installed you don’t have to worry about getting them replaced.

Option for authorized dealers

When you have decided to buy the wheel spacers from Nissan, it is a good idea to buy it from an authorized center. Visit the showroom of Nissan to check out their diverse collection of wheel spacers. Select the one that best fits your requirement and need. What are you waiting for? Go ahead and check out the collection today. Select the one that does justice to your vehicle type and budget.